

Toko Marga Setia
Marketing : Nandang Kurnia
Alamat : Jalan H.Kelik No.20 RT.03/RW.08 Kelapa Dua
Kebon Jeruk Jakarta Barat
Phone : 081384449443 / 087779284044
WhatsApp : klik --> http://bit.ly/margasetiaonline
Telp dan Fax : 021.22054159
Email : nandangmargasetia@gmail.com
Marketing : Nandang Kurnia
Alamat : Jalan H.Kelik No.20 RT.03/RW.08 Kelapa Dua
Kebon Jeruk Jakarta Barat
Phone : 081384449443 / 087779284044
WhatsApp : klik --> http://bit.ly/margasetiaonline
Telp dan Fax : 021.22054159
Email : nandangmargasetia@gmail.com
The SilverSchmidt ST/PC is the first integrated concrete test hammer featuring true rebound value and unmatched repeatability.
Two factors contribute to the improved performance of this concrete test hammer over its predecessors:
Velocity based detection of the rebound quotient
The lightweight hybrid design of the impact plunger is made from aerospace alloy, matched to the elastic properties of the concrete and equipped with a hardness steel cap
Independent validation testing by BAM (Federal Institute for Materials Research and Testing, Germany) has shown the SilverSchmidt ST/PC to have less dispersion than the classical concrete test hammer over the entire range.
The unique design and high quality construction of the concrete test hammer SilverSchmidt ST/PC makes rebound hammer testing quicker and more accurate than ever before.
Features
The SilverSchmidt ST/PC concrete test hammer combines a high measurement accuracy with an unmatched repeatability.
The rebound value requires no angular correction
The concrete test hammer offers customer conversion curves for a wide range of compressive concrete strengths, including low fc (<10 N/mm2, 1’450 psi) and high strength concrete (up to 100 N/mm2, 14’500 psi)
A large number of measurement points can be easily collected by the concrete test hammer and automatically evaluated according to statistical data
The concrete test hammer offers automatic conversion to the required measurement unit (MPa, N/mm2, kg/cm2, psi)
Applications
Ideally suited for on-site tests of concrete
The concrete test hammer is suitable for testing a wide variety of concrete, mortar and rock, but also for testing metal castings
Handy for difficult to access or confined test areas (i.e. working overhead)
Assessment on young, soft concrete with mushroom plunger of the concrete test hammer, eg. asphalt strength testing
It can be even used for underwater applications
Combining Methods to Evaluate Concrete Strength
Product Variations
Concrete test hammer SilverSchmidt Type ST N - Standard impact energy (2.207 Nm)
Concrete test hammer SilverSchmidt Type ST L - Reduced impact energy (0.735 Nm)
Concrete test hammer SilverSchmidt Type PC N - Standard impact energy (2.207 Nm) with PC communication, increased memory capacity and Hammerlink software
Concrete test hammer SilverSchmidt Type PC L- Reduced impact energy (0.735 Nm) with PC communication, increased memory capacity and Hammerlink software
Applicable Standards
The following standards can be applied to the concrete test hammer:
EN12504-2 (European Standard)
ASTM C 805 (North American Standard)
JGJ/T 23-2001 (Chinese Standard)
Technical Data
Mechanical data
Type ST N / PC N
concrete test hammer
Type ST L / PC L
concrete test hammer
Impact energy
2.207 Nm
0.735 Nm
Hammer mass
135 g
135 g
Spring constant
0.79 N/mm
0.26 N/mm
Spring extension
75 mm (2.95”)
75 mm (2.95”)
Housing dimensions
55 x 55 x 255 mm (2.16” x 2.16” x 9.84”)
Weight
570 g (1.3 lb)
PC application
Only for the concrete test hammer SilverSchmidt versions PC N and PC L: Hammerlink Software
Electrical data
Display
17 x 71 pixels; graphic / alphanumeric
Power consumption
~13 mA measuring, ~4 mA setup and review, ~0.02 mA idle
Battery life
>5000 impacts (before recharging)
Charger connection
USB type B (5V, 100 mA)
Measuring ranges
Concrete compressive strength
10-100 N/mm2 (1450-14500 psi)
Operating temperature
0 to 50 °C (32 to 122 °F)
Storage temperature
-10 to 70 °C (14 to 158 °F)
Posting Komentar